Hobby Spare Parts

[Rex Wade]

During recent discussions with Hobby UK I have negotiated the supply of genuine Hobby parts at dealer level discounts. I will ensure that the dealer level discount will be passed on to the member concerned.

As I am to meet with the managing director of Hobby Germany and the parts manager from Hobby UK, this coming Wednesday at the NEC show, I think that this would be an opportune time to test the system. Sorry about the short notice.

So if you have an enquiry for a Hobby part, please post your requirements here.

The procedure will be to supply your VIN (chassis number) plus your vehicle registration number which may also be helpful, and the nature of part(s) required. An enquiry will be made on your behalf as to the availability and price, to include dealer discount. If the price is acceptable to you, then payment would be expected upfront, direct to the club bank account, in the form of a cheque. The part(s) will then be placed on order and we are promised speedy delivery. Presently, the only delivery address that can be accommodated is to our treasurer and would normally be twice a week. Parts could be collected from there or taken to the next meet. Forwarding to your preferred address would be possible but this would incur an extra postage cost.

Regards
Rex

Topic

[David Lawson]

Hi Andy,
Exactly the information required.
I have been able to view your images in email.
Will pass the information on to Hobby in the morning.
They have requested a meeting which I should be able to fit in some time next week, so if anyone has any further requests for parts, please try and post them here before this weekend.

[Andrew Piggot]

David ,
The decal is number 7 on images and the locker is locker number 9 and on the detail of locker it is the lock assembly part nos 3, the key number on existing lock is FW924. I have attached photos to make it clearer , I hope!
Regards
Andy

[David Lawson]

Hi Andy,
Managed to post the images of the locker door and decal positions.
Can you identify the part numbers you require.
Must get to bed now, work in 7 hours time.

[David Lawson]

Hi John Watson, Andy Piggot and Eddy Bryan,

Below are the responses I have had from Hobby parts department having copied and pasted your requests from our forum.
Sorry about the delay which is my fault, I only approached them late last Friday, so their response has been quite speedy.
We should have prices in the next few days.

John Watsons reply is straight forward

Andy Piggots reply did include drawings of the door handle in question and positions of the decals. I have been unable to include the drawings here but may be able to cut and paste them in an email for your reference.

Eddy Bryans reply suggests that there is something wrong with the chassis number. Can you please check this and get back to me Eddy.

Hi Rex

We have a Hobby HGE 65 2013 and would like to establish whether I could purchase an integrated oven/grill which is sadly lacking from our model. I guess it will not be cheap but we feel it would make our existing motorhome complete. There are a few other replacement parts on our wanted list.
John Watson

We could supply the oven, but they would have to find a workshop (Gas certified) to fit it.

Hi Rex,
We have a Hobby Sphinx reg nos PF13XAN chassis number ZCFC50C0005861673, which we have recently acquired and would be grateful if you could ask about the following parts.
1 Handle assembly for the lockers and doors , after two including the locks with key number FW924.
2 We have a Hartal door on the motorhome and cassette blind in the door is damaged , its in two parts , one goes up and one goes down.
3 The drivers door has decals/transfers on it which have been scratched. Don’t know if its possible to just get the door ones or whether there would be a kit for the entire side.
Sorry I’m a bit late but been working.
Thanks
Andy Piggot

Is this the type of handle he is looking for? – The Door blind part number is 2400110307 Price to follow when I sort the club discount. He needs to tell us which numbers he wants for the decals-see below.

Hi Rex,
Sorry for delay in submitting this but hope that you can source & acquire the following for our Hobby 750 FMse reg’d Y390DAU with VIN ZFA23000006026666. They’re rubber strips inside the rails surrounding the door (white with visible/inner width of 9.2mm), and alongside the vehicle itself (grey with visible/inner width of 7.2mm), I can supply photos if necessary.
Thanks and all the best ~ Eddy Bryan

I think his chassis number is wrong, anyway I think the insert he is talking about is-
2531240095 BATTEN FILLER E-531 LIGHT-GRAY-7004 COIL

I think the insert around the door is-
1403560097 EDGE PROFILE LIGHT GRAY

[Eddy Bryan]

Hi Rex,
Sorry for delay in submitting this (gave up twice after page crashed), but hope that you can source & acquire the following for our Hobby 750 FMse reg’d Y390DAU with VIN ZFA23000006026666. They’re rubber strips inside the rails surrounding the door (white with visible/inner width of 9.2mm), and alongside the vehicle itself (grey with visible/inner width of 7.2mm); attached photos show more clearly what I mean.
Again, apologies for delay with this request, and do contact me on 07711368336 if you need to.
Thanks and all the best ~ Eddy

[Andrew Piggot]

Hi Rex,
We have a Hobby Sphinx reg nos PF13XAN chassis number ZCFC50C0005861673, which we have recently acquired and would be grateful if you could ask about the following parts.
1 Handle assembley for the lockers and doors , after two including the locks with key number FW924.
2 We have a Hartal door on the motorhome and cassette blind in the door is damaged , its in two parts , one goes up and one goes down.
3 The drivers door has decals/transfers on it which have been scratched. Don’t know if its possible to just get the door ones or whether there would be a kit for the entire side.

Sorry I’m a bit late but been working.
Thanks
Andy

[Anonymous]

<hr />

Hi Rex

We have a Hobby HGE 65 2013 and would like to establish whether I could purchase an integrated oven/grill which is sadly lacking from our model.  I guess it will not be cheap but we feel it would make our existing motorhome complete. There are a few other replacement parts on our wanted list.

 

Thanks

John

 

[Jim Smith]

Hi Rex

This is really good news and great progress with hobby , thank you for negotiating the terms for all of the members .

Hope you and Joan are keeping well ,hope the Toskana is going well too .

speak soon ,take care .Jim n D

[Author]

Replies